LTU2 PCB for 360 SLim DG-16D4S 16D5S 1175 and 1532


List price: $49.99  

Price: $7.99

You save: $42.00 (84%)
In stock

In stock in the USA for US customers!



These are OEM LTU 2 boards ( to be clear they are NOT made by Team Xecutor). They are 3rd party and act in pretty much the same way. To program your LTU2 firmware, follow the same instructions by making your LTU firmware file in Jungleflasher/Lizard.

Please note you will need to RGH your console to get the keys required to do this

However when it comes time to flash it, you need to treat the drive like a Liteon Phat DG16D2-S drive. So:


  • Load up your LTU 2 firmware
  • Click Liteon Erase to intro the drive
  • Switch drive off and then back on to get the drive into x72 mode
  • Write the firmware. Done!
  • Solder in the drive cables and install the drive board into your chasis.



Fits all Liteon DG-16D5S drive versions and allows you to reprogram your firmware to the board and then to set it to write protect to secure against any accidental firmware corruption / erasing.


  •     Fits all Liteon DG-16D5S Drives
  •     Fully compatible with 1175/1532 fw revisions
  •     Easily programmable using the X360USB PRO V1 or V2 or Maxius Lizard


All replacement boards are shipped blank. You must program your consoles correct firmware version and dvd key.


This device is designed primarily to aid or assist in the repair or replacement of defective hardware. It does not enable any kind of piracy or have any code or any kind of microchip whatsoever that circumvents any kind of protection. It is a basic circuit of wires and diodes that is all. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity.